|

| | | | |
 
 
 
 
 
 

 

Select A Product

Go

 

    

Home>Craft Tools>Ceramic & Sculpture Tools 1


Loop Tools
Spring-tempered stainless steel shapes mounted in thick tapered handles.
Use them to trim or refine the shape and control the wall thickness on green ware

Item #  LT01-LT10(From left to right)


Potter's Rib
Beautifully formed and polished boxwood tools for shaping clay while working on the wheel

Item # 
PR01-PR11  (Number seeing picture) 
PRS03     set/3  #1,2,4 /w poly bag
PRS05     set/5 #1-#5,/w poly bag
PRS06    set/6 any size,/w poly bag
PRS11     set/11   all ,/w poly bag


Double "O" Rib        NEW!
For cutting, slicing, shaping and smoothing soft clay. handcrafted and finished from hardwood and have a satin smooth finish

Item # OPR12    Measures: 12"  long


Throwing Stick        NEW!
This tool aids shaping and compressing deep, narrow necked wheel throwing pieces.

tem # TSK01    Measures: 12 1/2"  long


Sculpture Thumb
It is a 4-5/8 long hardwood tool which is shaped to fit the hand, this tool allows you to create those curves not even possible with your own hands

Item # SCT01


Hole Cutters
An easy tools for cutting holes in wet, thick walled green ware, Cutting tubes are sharp polished metal set in hardwood handles
Item #        Diameter of metal cutter
HC01           7/8"
HC02          11/16"
HC03          3/16"
HC04          1/8"
HC05          1/2"


Hole Cutters        NEW!
These are used for thick walled clay. The cutting tubes are sharpened, polished brass with a rubber cap covering the end

Item #        Diameter of metal cutter
HC07           1/2"
HC08           7/8"



Sharp Hole Cutters
These specially designed cutters feature stainless steel arc blades. Not like the round tube hole cutters, they can cut round holes, other shape holes very quickly and can be also used as special knives

Item #        HC09-12(from up to down)           
 


Sponge & Holder        NEW!
Get done inside deep places and hard-to-reach areas, reach ceilings and walls, or soak up excess paint. The 14" hardwood handle has a special attaching screw and cup washer that firmly holds favorite sponge. Our sponge is included with the Sponge Holder. 

Item #          Description
SPN01         Sponge  2 7/8" x 1 3/8"
SPN02         Sponge  Holder 14" long handle


Steel Scraper
Polished stainless steel , /w very good spring, used for shaping, smoothing and trimming pottery

Item # 
SS02-SS08 
(Number seeing picture,#5 Is tooth edge oval scraper)
SSS05  set/5

    
Clay Cutter
Gauge wire with wooden handles at each end .Makes cutting clay much easier

Item #  CC01

 
Wood Calipers
These lightweight instrument are for accurate out side measurements
Item #         Size
WCP12         12"
WCP10         10"
WCP08          8"


Steel Calipers        NEW!
These lightweight and easy to handle calipers transfer measurements from model to clay for both inside and outside dimensions. They are made from a tough steel alloy, and are assembled with rust-free hardware that is easily
adjusted by hand.


Item #           Diameter
SCP01-4        4"
SCP01-8        8"
SCP01-10      10"
SCP01-12      12"


Steel Calipers        NEW!
This slim calipers is particularly ideal for measuring inside dimensions. It is made from a tough steel alloy and assembled with rust free hard ware that is easily adjusted by hand

Item #           Diameter
SCP02-4        4"
SCP02-8        8"


Turning Tools        NEW!
Used by potters to accurately shape, contour and trim clay and plaster forms on the wheel. The heavy steel heads are brazed to steel shafts, plated and firmly set into smooth hardwood handles. There are 2 length series available

Item #          Description
TNT01         8" Turning tools 4 sided
TNT02         8" Turning tools Triangle
TNT03         8" Turning tools Tear Drop
TNT04         6 1/8" Turning tools 4 sided
TNT05         6 1/8" Turning tools Triangle 
TNT06         6 1/8" Turning tools Tear Drop
TNTS603     Set/3 of 6 1/8" turning tools
TNTS803     Set/3 of 8" turning tools